Skip to content
Sir CompareComparisons with evidenceYouTubeTelegram
United States · USD

News

USB device not showing up on your MacBook? Check permissions first

Updated

Illustrative photo: Tech & Computer: Desk Setup (Unsplash)
Illustrative photo

The permission prompt you may have dismissed

By default, macOS asks you to approve each accessory before it can connect, a safeguard against malware. If you accidentally reject that prompt, a legitimate device won't send data until you allow it. Charging still works either way.

Usually you can bring the prompt back by unplugging the accessory and plugging it in again. To cut down on future interruptions, open Apple menu > System Settings > Privacy & Security and scroll to the Accessories section. There you can pick Ask for new accessories, Automatically allow when unlocked or Always allow. The last option is best avoided unless you're always near your Mac or in a very secure place.

Does macOS even see the device?

Before digging further, confirm the Mac registers the accessory at all. Hold the Option key and click Apple menu > System Information. If the device appears under Hardware, the next step is the manufacturer's online support pages.

If it's invisible, or it shows up but throws an error each time you plug it in, the problem may be elsewhere. One likely candidate is power. Some accessories draw more than a Mac's USB port can deliver, and you'd normally get a related message. In that case the accessory may have its own power cable to connect.

Ports, hubs and docks in the chain

If your accessory has no separate power supply, the USB port itself may be the culprit. Try other ports on the Mac, or plug straight in if you were going through a hub or dock.

Hubs and docks often need their own power adapters. Even without one, a chain of devices has to carry power or data across several hops, and that's where things break. Engadget describes a Thunderbolt dock where a wireless mouse receiver stopped working until it was connected directly to the laptop, while an SSD on the same dock kept working fine. With free ports available, skipping the middleman is the safer route.

Software updates and when to call support

Keep macOS current: go to Apple menu > System Settings > General and click Software Update. Bugs or driver compatibility issues could be interfering, according to Engadget.

If power-related warnings keep appearing, the advice is to contact Apple tech support. It's possible the Mac simply isn't feeding power to its USB ports. Engadget notes that most situations have simple fixes, especially on the software side, but rare cases need outside help.

Related coverage

Source: Engadget · Tech e gadget (US)

Video

What changed

  • Page updated

How I put products in order

Sir Compare’s letter

Updates on Technology & computers? I’ll send them your way.

Pick what you care about: I only write when something new comes out — a guide, a news story, a verified price that drops.

Step 1 of 2

What are you into?

Pick as many as you like. Pick none and you get what’s new in every section.

What you want to receive
  • Only what you pick
  • Never an empty email
  • One click to leave

Your assistant

Open full page →