Vai al contenuto

Lingua interfaccia: IT. Contenuti editoriali: inglese. Prezzi riferiti a Stati Uniti.

Sir CompareConfronti con le proveYouTubeTelegram
Stati Uniti · USD

Notizia

Old CRT, new terminal: a Pi Zero 2W retro setup

Aggiornato

Foto illustrativa: Tech & Computer: Desk Setup (Unsplash)
Foto illustrativa

A drawer Pi and a dusty CRT become a terminal

Sydney Butler, writing for How-To Geek, put together a dedicated terminal from hardware he already owned. The idea came from his own habit: he SSHes from his Mac's terminal once or twice a week for self-hosting and remote control of devices on his LAN. He had an old Samsung CRT sitting unused and a Pi Zero 2W idle in a drawer. He describes the project as having no practical justification, and says he wanted to do it anyway. The result is a monitor that boots straight into a terminal, ready to connect to other headless machines on the same network.

The parts list: SyncMaster, Pi, adapter, keyboard

The build uses a Samsung SyncMaster 793s 17-inch CRT monitor, which Butler describes as having a rusty VGA plug and dust in hard-to-reach spots. The computer is a Raspberry Pi Zero 2W, paired with a 32GB SD card, the smallest he had on hand. A MacBook with an SD card reader handles the imaging, done with the Raspberry Pi Imager tool. To bridge the Pi's HDMI output to the monitor's VGA input, he used a cheap generic HDMI to VGA adapter. Input comes from an old wireless Logitech keyboard, and generic USB chargers power both the adapter and the Pi.

Raspberry Pi Lite keeps the 512MB of RAM free

Because the Pi Zero 2W is a low-end device with limited memory, Butler chose the leanest software option. He wrote Raspberry Pi Lite to the card with the Imager, a version of Pi OS with no graphical interface. It occupies only 3GB of the SD card and uses roughly 150MB of RAM at idle. That leaves room in the Pi's 512MB for headless applications, in case he decides a pure terminal wastes the hardware. He notes the setup takes about five minutes.

Boot straight to the prompt, SSH in from anywhere on the LAN

After inserting the card and connecting the cables and adapters, the system powered on and started up. The first boot involves setup and unpacking, but afterward it boots directly into the terminal. Butler had entered SSH details while imaging the card, so he confirmed he could also reach the Pi over SSH. That means he can change settings on it from his main workstation without walking over. From the monitor itself, he can SSH into any other headless system that is switched on and connected to his local network.

What the terminal is actually for

Butler is upfront that the project started as fun rather than necessity. Now that it works, he is considering moving his self-hosted Wikipedia instance onto the Pi Zero, which would give the little terminal a job beyond connecting to other machines. The setup stays deliberately minimal: no desktop, no extra software, just a screen and a prompt. Anyone with a spare CRT, a Pi Zero 2W, an HDMI to VGA adapter, and a keyboard has the same ingredients. Whether it earns a permanent spot on the desk is a question he leaves open.

Related coverage

Source: How-To Geek · software & apps

Video

Cosa è cambiato

  • Pagina aggiornata

Come metto in fila i prodotti

La posta di Sir Compare

Novità su Tecnologia e computer? Te le scrivo io.

Scegli cosa ti interessa: ti scrivo solo quando esce qualcosa di nuovo — una guida, una notizia, un prezzo verificato che scende.

Passo 1 di 2

Cosa ti interessa?

Scegline quante vuoi. Se non scegli niente, ricevi le novità di tutte le sezioni.

Cosa vuoi ricevere
  • Solo quello che scegli
  • Mai email vuote
  • Esci con un clic

Il tuo assistente

Apri la pagina completa →